4413

Adafruit
485-4413
4413

Mfr.:

คำอธิบาย:
Multiple Function Sensor Development Tools Adafruit LSM303AGR Accelerometer Magnetometer - STEMMA QT Qwiic

มีอยู่ในสต็อก: 23

สต็อก:
23
สามารถจัดส่งได้ทันที
ในการสั่งซื้อ:
49
6/4/2569 ที่คาดหวัง
ระยะเวลารอสินค้าจากโรงงาน:
13
สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
฿406.25 ฿406.25

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Adafruit
ประเภทสินค้า: เครื่องมือพัฒนาเซนเซอร์หลายฟังก์ชัน
มาตรฐาน RoHS:  
Evaluation Boards
Acelerometer Magnetometer
LSM303AGR
เครื่องหมายการค้า: Adafruit
ขนาด: 25.4 mm x 17.7 mm x 4.6 mm
ประเภทอินเตอร์เฟส: I2C
ประเภทสินค้า: Multiple Function Sensor Development Tools
ระดับ: STEMMA
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 1
หมวดหมู่ย่อย: Development Tools
น้ำหนักต่อหน่วย: 1.700 g
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

CNHTS:
8543709990
USHTS:
9031808085
ECCN:
EAR99

STEMMA Soil Sensor

Adafruit STEMMA Soil Sensor offers a capacitive touch measurement system integrated into the ATSAMD10 microcontroller chip. The built-in feature allows the sensor to read from about 200 (very dry) to 2,000 (very wet). The STEMMA Soil Sensor's capacitive measurements use a single probe with no exposed metal, preventing probe oxidation. The probe also won't introduce DC currents into plants. It provides ambient temperature from the internal temperature sensor on the microcontroller via an I2C interface allowing it to be used with most microcontrollers.

LSM303AGR Accelerometer Magnetometer Breakout

Adafruit LSM303AGR Accelerometer Magnetometer Breakout Board is a triple-axis accelerometer/magnetometer compass module. Inside the Adafruit breakout board are two sensors. One sensor is a 3-axis accelerometer, which can tell the user which direction is down towards the Earth (by measuring gravity). The other sensor is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. This board is based on the LSM303AGR. This compact sensor uses I2C to communicate and is very easy to use. The user downloads the Adafruit library and connects the SCL pin to the I2C clock pin and the SDA pin to the I2C data pin. Then, the user uploads the Adafruit test program to read out the accelerometer and magnetic field data.