MLJ1608WGCR56NTD25

TDK
810-MLJ1608WGCR56N25
MLJ1608WGCR56NTD25

Mfr.:

คำอธิบาย:
RF Inductors - SMD 1608 0.56uH 30% 0.45ohm 500mA

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

มีอยู่ในสต็อก: 7,086

สต็อก:
7,086 สามารถจัดส่งได้ทันที
ระยะเวลารอสินค้าจากโรงงาน:
15 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
การบรรจุ:
ม้วน แบบเต็ม (สั่งซื้อ 4000 จำนวนหลายชิ้น)

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
เทปตัด / MouseReel™
฿8.45 ฿8.45
฿6.89 ฿68.90
฿6.86 ฿171.50
฿5.72 ฿572.00
฿5.69 ฿1,422.50
฿4.71 ฿4,710.00
ม้วน แบบเต็ม (สั่งซื้อ 4000 จำนวนหลายชิ้น)
฿4.36 ฿17,440.00
฿4.19 ฿33,520.00
† จะมีการคำนวณและเพิ่มค่าธรรมเนียม MouseReel™ จำนวน ฿230.00 ในรถเข็นสินค้าของคุณ ผลิตภัณฑ์ MouseReel™ ทุกรายการไม่สามารถยกเลิกการสั่งซื้อและคืนสินค้าได้

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
TDK
ประเภทสินค้า: ตัวเหนี่ยวนำคลื่นความถี่วิทยุ - SMD
มาตรฐาน RoHS:  
Multilayer
0603 (1608 metric)
Unshielded
560 nH
30 %
500 mA
700 mOhms
- 55 C
+ 125 C
Standard
1.6 mm
0.8 mm
0.8 mm
Ferrite
AEC-Q200
MLJ-G
Reel
Cut Tape
MouseReel
การประยุกต์ใช้: Decoupling
เครื่องหมายการค้า: TDK
รหัสเคส - นิ้ว: 0603
รหัสเคส - มม.: 1608
รูปแบบการติด: PCB Mount
สินค้า: RF Inductors
ประเภทสินค้า: RF Inductors - Leaded
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 4000
หมวดหมู่ย่อย: Inductors, Chokes & Coils
รูปแบบการสิ้นสุด: SMD/SMT
การทดสอบความถี่: 25 MHz
นามแฝงของหมายเลขชิ้นส่วน: MLJ1608WGCR56NTD25 -
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

เอกสารข้อมูลสินค้า

ฟังก์ชันนี้จำเป็นต้องเปิดใช้งาน JavaScript

CNHTS:
8504500000
CAHTS:
8504500000
USHTS:
8504508000
JPHTS:
850450000
TARIC:
8504500090
MXHTS:
8504509199
BRHTS:
85045000
ECCN:
EAR99

Power-over-Coax (PoC) Solutions

TDK Power-over-Coax (PoC) Solutions feature a wide range of inductors suitable for automotive applications. PoC is a practical way to streamline camera wiring in modern vehicles by transmitting both data and power on a single coaxial cable, lowering cable count while improving efficiency and packaging. Because PoC requires inductive filtering to separate power from signal, TDK offers solutions across multilayer, wire-wound, and thin-film technologies to cover a variety of design trade-offs. The broad selection of TDK inductors is categorized by current capacity and communication speed, helping engineers match components to the specific requirements of in-vehicle camera systems.

MLJ-G Series Fixed Inductors

TDK MLJ-G Series Fixed Inductors are compact components designed for use in automotive Power over Coax (PoC) implementations. MLJ-G inductors feature a maximum impedance rating of 2500Ω and offer less current variation when compared to conventional multilayer inductors. These inductors achieve a high-rated current of 500mA despite the 1.6mm x 0.8mm x 0.8mm dimensions, significantly reducing variation in impedance during current applications. In addition, these components deliver assured performance at temperatures of up to +125°C.