LI-USB30-CSLINK-IPX-TESTER

Leopard Imaging
931-LI-USB30-CSLIN
LI-USB30-CSLINK-IPX-TESTER

Mfr.:

คำอธิบาย:
Interface Modules (Default Firmware)

วัฏจักร:
สินค้าใหม่:
สินค้าใหม่จากผู้ผลิตนี้
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

สินค้าพร้อมส่ง

สต็อก:
ไม่มีในสต็อก
ระยะเวลารอสินค้าจากโรงงาน:
3 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณ
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
ผลิตภัณฑ์นี้จัดส่งฟรี

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
฿9,717.50 ฿9,717.50

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Leopard Imaging
ประเภทสินค้า: โมดูลอินเตอร์เฟส
Converters
MIPI-CSI-2 to Parallel
2 Port
Micro USB 3.0, MIPI-CSI-2
5 V
5 V
เครื่องหมายการค้า: Leopard Imaging
ขนาด: 36.5 mm x 26.5 mm x 18.7 mm
ประเภทสินค้า: Interface Modules
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 1
หมวดหมู่ย่อย: Embedded Solutions
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

                        
Product will have default firmware unless specified. Please
review the following conditions if applicable to your products
firmware.

For USB3.0 and USB2.0 cameras, the supplier will need to flash
the firmware and/or FPGA binary.

Cameras with built-in ISP (except for the AR0234-YUV), the
supplier will need to flash the ISP binary to camera.
For all the MIPI adapters with FPGA for Jetson, supplier will
need to flash the FPGA binary.

For all the Jetson boxes or carrier board with SOM, supplier
will need to flash the OS image and install the driver.

Please contact a Mouser Technical Support Representative for
further assistance.

5-0725-1

USHTS:
8525894000

สินค้าที่น่าสนใจ
LEOPARD IMAGING