TPS92391RHBR

Texas Instruments
595-TPS92391RHBR
TPS92391RHBR

Mfr.:

คำอธิบาย:
LED Lighting Driver ICs Boost/SEPIC high dim ming performance LE

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

มีอยู่ในสต็อก: 4,702

สต็อก:
4,702 สามารถจัดส่งได้ทันที
ระยะเวลารอสินค้าจากโรงงาน:
18 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
การบรรจุ:
ม้วน แบบเต็ม (สั่งซื้อ 3000 จำนวนหลายชิ้น)

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
เทปตัด / MouseReel™
฿124.11 ฿124.11
฿93.87 ฿938.70
฿86.31 ฿2,157.75
฿78.12 ฿7,812.00
฿74.03 ฿18,507.50
฿71.51 ฿35,755.00
฿69.62 ฿69,620.00
ม้วน แบบเต็ม (สั่งซื้อ 3000 จำนวนหลายชิ้น)
฿61.74 ฿185,220.00
† จะมีการคำนวณและเพิ่มค่าธรรมเนียม MouseReel™ จำนวน ฿230.00 ในรถเข็นสินค้าของคุณ ผลิตภัณฑ์ MouseReel™ ทุกรายการไม่สามารถยกเลิกการสั่งซื้อและคืนสินค้าได้

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Texas Instruments
ประเภทสินค้า: IC ไดรเวอร์ของไฟ LED
มาตรฐาน RoHS:  
6 Output
Boost, SEPIC
200 mA
QFN-32
48 V
3 V
100 kHz to 2.2 MHz
48 V
TPS92391
- 40 C
+ 125 C
I2C Control, PWM Control
Reel
Cut Tape
MouseReel
เครื่องหมายการค้า: Texas Instruments
ประเทศแหล่งประกอบ: Not Available
ประเทศแหล่งกระจาย: Not Available
ประเทศถิ่นกําเนิด: CN
การหรี่: PWM
แรงดันไฟฟ้าขาเข้า: 3 V to 48 V
อ่อนไหวต่อความชื้น: Yes
รูปแบบการติด: SMD/SMT
จำนวนช่องสถานี: 6 Channel
ประเภทขาออก: Open Drain
สินค้า: LED Lighting Drivers
ประเภทสินค้า: LED Lighting Drivers
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 3000
หมวดหมู่ย่อย: Driver ICs
ประเภท: High Dimming
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

เอกสารข้อมูลสินค้า

ฟังก์ชันนี้จำเป็นต้องเปิดใช้งาน JavaScript

CNHTS:
8542399000
USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TPS92391 Boost/SEPIC LED Driver

Texas Instruments TPS92391 Boost/SEPIC LED Driver is an automotive high-efficiency LED driver with a boost controller. The six high-precision current sinks support phase shifting that is automatically adjusted based on the number of channels in use. LED brightness can be controlled globally through the I2C interface or PWM input. The boost controller has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the boost voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the TPS92391 to avoid disturbance for AM radio band. The Texas Instruments TPS92391 supports built-in hybrid PWM dimming and analog current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency.