CL7SG-G

Microchip Technology
689-CL7SG-G
CL7SG-G

Mfr.:

คำอธิบาย:

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

สินค้าพร้อมส่ง

สต็อก:
ไม่มีในสต็อก
ระยะเวลารอสินค้าจากโรงงาน:
4 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณ
จำนวนขั้นต่ำ: 3300   หลายรายการ: 3300
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
ผลิตภัณฑ์นี้จัดส่งฟรี

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
ม้วน แบบเต็ม (สั่งซื้อ 3300 จำนวนหลายชิ้น)
฿49.40 ฿163,020.00

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Microchip
ประเภทสินค้า: IC ไดรเวอร์ของไฟ LED
มาตรฐาน RoHS:  
SOIC-8
28 V
6.5 V
- 40 C
+ 119 C
Reel
เครื่องหมายการค้า: Microchip Technology
แรงดันไฟฟ้าขาเข้า: 6.5 V to 28 V
อ่อนไหวต่อความชื้น: Yes
รูปแบบการติด: SMD/SMT
สินค้า: LED Drivers
ประเภทสินค้า: LED Lighting Drivers
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 3300
หมวดหมู่ย่อย: Driver ICs
ประเภท: Linear LED Driver
น้ำหนักต่อหน่วย: 143 mg
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

ฟังก์ชันนี้จำเป็นต้องเปิดใช้งาน JavaScript

CNHTS:
8542399000
CAHTS:
8541210000
USHTS:
8541210095
JPHTS:
8541210101
KRHTS:
8541219000
TARIC:
8541210000
MXHTS:
85412101
ECCN:
EAR99

CL7 Linear Constant Current LED Driver with Enable

Microchip CL7 Linear Constant Current LED Driver with Enable is a linear fixed current regulator designed for driving high brightness LEDs at 100mA from nominal 12V, 24V, and 48V power supplies. With a maximum rating of 90V, Microchip CL7 Linear Constant Current LED Driver is able to withstand transients without the need for additional transient protection circuitry. An active-low enable input allows logic level control of the LED for on/off control or PWM dimming. The enable input has 100kΩ pull-down resistance. Overtemperature protection shuts off the LED current when the die temperature rises above +135°C (nominal). Full LED current resumes when the die temperature falls below +105°C (nominal).

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.