STR485LVQT

STMicroelectronics
511-STR485LVQT
STR485LVQT

Mfr.:

คำอธิบาย:
RS-485 Interface IC 3.3V RS485 compatible with 1.8V I/Os and selectable speed 20Mbps or 250kbps

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

มีอยู่ในสต็อก: 4,576

สต็อก:
4,576 สามารถจัดส่งได้ทันที
ระยะเวลารอสินค้าจากโรงงาน:
16 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
การบรรจุ:
ม้วน แบบเต็ม (สั่งซื้อ 3000 จำนวนหลายชิ้น)

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
เทปตัด / MouseReel™
฿120.90 ฿120.90
฿81.90 ฿819.00
฿75.73 ฿1,893.25
฿65.98 ฿6,598.00
฿62.40 ฿15,600.00
ม้วน แบบเต็ม (สั่งซื้อ 3000 จำนวนหลายชิ้น)
฿52.65 ฿157,950.00
฿39.98 ฿239,880.00
† จะมีการคำนวณและเพิ่มค่าธรรมเนียม MouseReel™ จำนวน ฿230.00 ในรถเข็นสินค้าของคุณ ผลิตภัณฑ์ MouseReel™ ทุกรายการไม่สามารถยกเลิกการสั่งซื้อและคืนสินค้าได้

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
STMicroelectronics
ประเภทสินค้า: อินเตอร์เฟส RS-485 ของวงจรวม
มาตรฐาน RoHS:  
SMD/SMT
DFN-10
STR485
Transceiver
20 Mb/s
1 Driver
1 Receiver
Half Duplex
3.6 V
1.65 V
625 uA
- 40 C
+ 105 C
16 kV
Reel
Cut Tape
MouseReel
เครื่องหมายการค้า: STMicroelectronics
แรงดันไฟฟ้าขาเข้า: 3.3 V
การจ่ายแรงดันที่ใช้งาน: 3.3 V
กระแสขาออก (1): 80 mA
สินค้า: RS-485 Transceivers
ประเภทสินค้า: RS-485 Interface IC
ระยะเวลาที่ล่าช้าในการกระจายไฟฟ้า: 12 ns
การปิด: Shutdown
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 3000
หมวดหมู่ย่อย: Interface ICs
ประเภท: Low Power Differential Line Transceiver
น้ำหนักต่อหน่วย: 21 mg
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

CNHTS:
8542399000
USHTS:
8542390090
ECCN:
EAR99

Standard Products

STMicroelectronics Standard Products are a broad range of industry-standard and drop-in replacements for the most popular general-purpose analog ICs, discretes, and serial EEPROMs. The Standard Products are manufactured to the highest quality standards with many AECQ-qualified for automotive applications. A comprehensive set of STMicroelectronics design aids, including SPICE, IBIS models, and simulation tools, is available to make adding to a design-in easy.

STR485 RS-485 Line Transceiver

STMicroelectronics STR485 RS-485 Line Transceiver is a low-power differential line transceiver for data transmission standard RS-485 applications in half-duplex mode. Data and enable signals are compatible with 1.8V or 3.3V supplies. Two speeds are selectable through the SLR pin: a fast data rate up to 20Mbps or a slow data rate for an extended cable running to 250kbps. Excessive power dissipation caused by bus contention or faults is prevented by a thermal shutdown circuit that forces the driver outputs into a high impedance state. The STMicroelectronics STR485 RS-485 Line Transceiver has a fail-safe feature, which guarantees a high output state when the inputs are left open, shorted or idle.