STAP08DP5XTTR

STMicroelectronics
511-STAP08DP5XTTR
STAP08DP5XTTR

Mfr.:

คำอธิบาย:
LED Display Drivers Low voltage 8-bit constant current LED sink driver with output error detection f

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

มีอยู่ในสต็อก: 17,432

สต็อก:
17,432 สามารถจัดส่งได้ทันที
ระยะเวลารอสินค้าจากโรงงาน:
24 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
การบรรจุ:
ม้วน แบบเต็ม (สั่งซื้อ 2500 จำนวนหลายชิ้น)

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
เทปตัด / MouseReel™
฿43.93 ฿43.93
฿31.82 ฿318.20
฿28.65 ฿716.25
฿25.55 ฿2,555.00
฿23.97 ฿5,992.50
฿23.03 ฿11,515.00
฿22.03 ฿22,030.00
ม้วน แบบเต็ม (สั่งซื้อ 2500 จำนวนหลายชิ้น)
฿21.38 ฿53,450.00
† จะมีการคำนวณและเพิ่มค่าธรรมเนียม MouseReel™ จำนวน ฿230.00 ในรถเข็นสินค้าของคุณ ผลิตภัณฑ์ MouseReel™ ทุกรายการไม่สามารถยกเลิกการสั่งซื้อและคืนสินค้าได้

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
STMicroelectronics
ประเภทสินค้า: ไดรเวอร์จอ LED
มาตรฐาน RoHS:  
8 Digit
TSSOP-16
16 mA
SMD/SMT
- 40 C
+ 150 C
STAP08DP05
AEC-Q100
Reel
Cut Tape
MouseReel
เครื่องหมายการค้า: STMicroelectronics
กระแสไฟขาออกระดับสูง: 1 mA
กระแสไฟขาออกระดับต่ำ: - 1 mA
การจ่ายแรงดันที่ใช้งาน: 3.3 V
ประเภทสินค้า: LED Display Drivers
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 2500
หมวดหมู่ย่อย: Driver ICs
น้ำหนักต่อหน่วย: 173 mg
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

รหัสการปฏิบัติตามข้อกำหนด
CNHTS:
8542319090
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99
การจัดประเภทแหล่งกำเนิด
ประเทศถิ่นกําเนิด:
ฟิลิปปินส์
ประเทศผู้ผลิตชิ้นส่วนประกอบ:
ไม่มี
ประเทศแหล่งกระจาย:
ไม่มี
ประเทศอาจมีการเปลี่ยนแปลง ณ เวลาที่จัดส่ง

STAPxxDPS05 LED Display Drivers

STMicroelectronics STAP08DP05, STAP16DPPS05, and STAP16DPS05 LED Display Driver ICs are monolithic, low voltage, low current power 8-bit or 16-bit shift registers designed for LED panel displays. Each device contains either an 8-bit or 16-bit serial-in, parallel-out shift register that feeds an 8-bit or 16-bit D-type storage register. In the output stage, eight or sixteen regulated current sources are designed to provide 5mA to 100mA (3mA to 40mA for the STAP16DPPS05) constant current to drive the LEDs. The detection circuit checks 3 different conditions that can occur on the output line: short to GND, short to VO or open line. The data detection results are loaded in the shift register and shifted out via the serial line output. The 3.3V of voltage supply is very useful for applications that interface any microcontroller from 3.3V.