TPS92662AQPHPRQ1

Texas Instruments
595-TPS92662AQPHPRQ1
TPS92662AQPHPRQ1

Mfr.:

คำอธิบาย:
LED Lighting Driver ICs 12-Channel high-brig htness LED matrix m

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

มีอยู่ในสต็อก: 2,612

สต็อก:
2,612 สามารถจัดส่งได้ทันที
ระยะเวลารอสินค้าจากโรงงาน:
18 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
การบรรจุ:
ม้วน แบบเต็ม (สั่งซื้อ 1000 จำนวนหลายชิ้น)

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
เทปตัด / MouseReel™
฿221.45 ฿221.45
฿171.05 ฿1,710.50
฿158.13 ฿3,953.25
฿144.27 ฿14,427.00
฿137.66 ฿34,415.00
฿133.56 ฿66,780.00
ม้วน แบบเต็ม (สั่งซื้อ 1000 จำนวนหลายชิ้น)
฿130.10 ฿130,100.00
฿127.26 ฿254,520.00
† จะมีการคำนวณและเพิ่มค่าธรรมเนียม MouseReel™ จำนวน ฿230.00 ในรถเข็นสินค้าของคุณ ผลิตภัณฑ์ MouseReel™ ทุกรายการไม่สามารถยกเลิกการสั่งซื้อและคืนสินค้าได้

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Texas Instruments
ประเภทสินค้า: IC ไดรเวอร์ของไฟ LED
มาตรฐาน RoHS:  
12 Output
Boost, Buck
HTQFP-48
60 V
4.5 V
Adjustable
TPS92662A
- 40 C
+ 125 C
Fault Detection, Fault Diagnostic, Hybrid Dimming/Phase Shift, I2C Control, Integrated Switch
Reel
Cut Tape
MouseReel
เครื่องหมายการค้า: Texas Instruments
แรงดันไฟฟ้าขาเข้า: 4.5 V to 60 V
อ่อนไหวต่อความชื้น: Yes
รูปแบบการติด: SMD/SMT
จำนวนช่องสถานี: 12 Channel
สินค้า: LED Drivers
ประเภทสินค้า: LED Lighting Drivers
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 1000
หมวดหมู่ย่อย: Driver ICs
ประเภท: LED Matrix
น้ำหนักต่อหน่วย: 251.400 mg
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

ฟังก์ชันนี้จำเป็นต้องเปิดใช้งาน JavaScript

CNHTS:
8542399000
USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

TPS92662A-Q1 LED Matrix Manager

Texas Instruments TPS92662A-Q1 LED Matrix Manager enables fully dynamic adaptive lighting solutions by providing individual pixel-level LED control. The device includes four sub-strings of three series-connected integrated switches for bypassing individual LEDs. The individual sub-strings allow the device to accept single or multiple current sources. The TPS92662A-Q1 features a programmable Pierce crystal oscillator driver. Optimal performance is achieved by selecting the driver strength based on the manufacturer's recommendations for quartz crystal or ceramic resonators. The device also incorporates a selectable drive strength clock buffer. The rise and fall times and the EMI generated by a clock signal are controlled by varying the drive strength of the clock buffer. When necessary, the clock buffer can be disabled to eliminate the noise generated by the clock signal and provide the lowest EMI performance.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.