MP2681GS-Z

Monolithic Power Systems (MPS)
946-MP2681GS-Z
MP2681GS-Z

Mfr.:

คำอธิบาย:
Battery Management CC/CV Controller Full Protection

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

สินค้าพร้อมส่ง

สต็อก:
ไม่มีในสต็อก
ระยะเวลารอสินค้าจากโรงงาน:
14 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณ
จำนวนขั้นต่ำ: 2500   หลายรายการ: 2500
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
ผลิตภัณฑ์นี้จัดส่งฟรี

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
ม้วน แบบเต็ม (สั่งซื้อ 2500 จำนวนหลายชิ้น)
฿27.09 ฿67,725.00
฿26.49 ฿132,450.00

ตัวเลือกอื่นสำหรับบรรจุภัณฑ์

Mfr. หมายเลขชิ้นส่วน:
การบรรจุ:
Reel, Cut Tape
สินค้าพร้อมส่ง:
มีอยู่ในสต็อก
ราคา:
฿101.75
จำนวนขั้นต่ำ:
1

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Monolithic Power Systems (MPS)
ประเภทสินค้า: การจัดการแบตเตอรี่
มาตรฐาน RoHS:  
Charge Management
Lithium-ion, Lithium Polymer
5 V
15 mA
4.5 V to 30 V
SOIC-16
SMD/SMT
MP2681
Reel
เครื่องหมายการค้า: Monolithic Power Systems (MPS)
ประเทศแหล่งประกอบ: Not Available
ประเทศแหล่งกระจาย: Not Available
ประเทศถิ่นกําเนิด: Not Available
ค่าสูงสุดของอุณหภูมิในการใช้งาน: + 125 C
ค่าต่ำสุดของอุณหภูมิในการใช้งาน: - 40 C
อ่อนไหวต่อความชื้น: Yes
กระแสไฟฟ้าที่จ่ายใช้งาน: 500 uA
Pd - กำลังงานสูญเสีย: 1.6 W
ประเภทสินค้า: Battery Management
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 2500
หมวดหมู่ย่อย: PMIC - Power Management ICs
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

เอกสารข้อมูลสินค้า

CNHTS:
8542319000
USHTS:
8542310030
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

MP2681 CV/CV Controller

Monolithic Power Systems MP2681 CV/CV Controller is designed as a highly integrated Li-Ion or Li-polymer switch mode battery charge controller with full protection and status indication. The device integrates a precision voltage reference and charge status indications suitable for AC adapter input and cradle charger applications. The MP2681 automatically detects the battery cell through a battery ID resistor and regulates the battery voltage according to the corresponding cell configurations: 3S1P, 3S2P, 4S1P, 4S2P, 5S1P and 5S2P. Then, the AC adapter output is automatically regulated according to the battery configuration chosen. In addition, if the battery pack does not have an ID resistor, the designer can configure the charge termination by setting a dedicated voltage to the ID pin according to the six pre-set VID values representing each battery configuration.