SPIRLED-4850

Wakefield Thermal
567-SPIRLED-4850
SPIRLED-4850

Mfr.:

คำอธิบาย:
LED Heat Sinks & Thermal Substrates Heat Sink, SPIR LED, 48mm Diameter, 50mm Height

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

มีอยู่ในสต็อก: 187

สต็อก:
187 สามารถจัดส่งได้ทันที
ระยะเวลารอสินค้าจากโรงงาน:
16 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
฿415.68 ฿415.68
฿414.05 ฿4,140.50
฿376.68 ฿7,533.60
฿359.78 ฿17,989.00
฿349.38 ฿34,938.00
฿328.90 ฿65,780.00
฿289.58 ฿144,790.00
฿257.08 ฿257,080.00

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Wakefield Thermal
ประเภทสินค้า: แผงระบายความร้อน LED และซับสเตรตความร้อน
มาตรฐาน RoHS:  
Aluminum
5 C/W
50 mm
48 mm
Longitudinal Fin
เครื่องหมายการค้า: Wakefield Thermal
สี: Black
สินค้า: Heatsinks
ประเภทสินค้า: LED Heat Sinks
ระดับ: SPIRLED
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 100
หมวดหมู่ย่อย: Heat Sinks
ความกว้าง: 48 mm
น้ำหนักต่อหน่วย: 134 g
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

เอกสารข้อมูลสินค้า

CAHTS:
8541900000
USHTS:
8541900080
JPHTS:
854190000
TARIC:
8541900000
ECCN:
EAR99

SpirLED COB & SMD LED Heat Sinks

Wakefield Thermal SpirLED COB and SMD LED Heat Sinks for active and passive cooling are compact in size with a large amount of surface area. The series features a modular design with mounting holes for direct mounting of LED modules and COBs. The heat sinks are black anodized and extruded from highly conductive aluminum. Wakefield Thermal SpirLED heat sinks are compatible with many different LED modules and COBs.

COB & SMD LED Heat Sinks

Wakefield Thermal COB and SMD LED Heat Sinks for active and passive cooling are compact with a large cooling surface area. Concentrated heat requires sufficient thermal contact areas to quickly help the heat sink to dissipate heat through passive cooling. If the central conductive column of the heat sink is too large, the heat cannot be quickly transferred to the heat sink. A large amount of heat will be attached to the inside of the lamp, resulting in a large increase in temperature. The heat on the COB source cannot be completely transmitted, and the service life will be rapidly reduced. This can potentially pose a safety hazard. Wakefield Thermal COB and SMD LED Heat Sinks allow for active and passive cooling over the whole surface.